How to fix Lexmark Printer Error Code EC1

Are you getting Lexmark printer Error code EC1 while using this device? Well, if yes then not to worry because Lexmark Printer Customer Support is available for you. Usually this error code indicate print head ID is not valid and Incorrect Print head.

You can also fix this error yourself by following the steps below:

1. First turn ON the device properly.
2. Now you have to open the cover of machine. The print cartridge mover moves and stops at the loading position, unless the All-in-One is busy.

Note: If the carrier does not automatically move to the centre, turn off the printer/unplug the printer from the power source and then slide the carrier to the centre.

3. Now you need to remove both the cartridges from the carrier.
4. Properly close the printing machine cover.
5. Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds.
6. Reinsert one cartridge first if printer turns on again.
7. After executing the above steps close the cover of printer and identify errors.
8. If there is no error appearing, carefully reinsert the other cartridge.
9. Finally you have to replace the cartridge which is responsible for the error to appear with a new cartridge.

Need Help - Contact Lexmark Customer Support

For Additional assistance you have to make a call on toll-free 1-800-862-1908 Lexmark Printer Customer Support Phone Number. Here experts deliver you hassle –free solution on the time and minimal cost.

Useful tips to resolve Low-Quality Printing Problem With Canon Printer

If you are getting a low-quality print from canon printer then, don’t curse your printing machine. If you want to get high-quality prints then make some changes in printer setting.

But what kind of changes should be made? To get the answer to this question, read the following tips carefully.

Fix

Select the correct print size
Always ensure that you are selecting the right print size. In order to get quality prints, you need to have a minimum of 300 dpi (dots per inch).

Always use specific ink for specific Printer
It is advised that always use manufacturer’s ink if using for a refilling purpose. Because feeding ink cartridge with anything may produce low-Quality prints. If you are facing any kind of problem while refilling the ink then contact Canon Printer Customer Support.

Choose the right Paper
To improve the quality of print always trying to choosing the accurate paper which helps in improving the poor print quality. So, always use quality paper as a quality result.

Properly Check Setting of Printer
Whenever you are taking printout always check the setting of printer carefully. Also, check whether the papers are loaded correctly or not? If you find any find in printer setting and paper orientation then correct it first.

Regular maintenance of Machine
You all know that machine needs regular maintenance for smooth working. So regular check your device if you find any kind of damage in it then maintain it at the time for the better result.

Hopefully, above listed tips can help you solve low-quality printing problem in Canon Printer with ease. If still, you are not content with the result after practically following the above action, it is better to take help from experts by dialing a toll-free 1-800-862-1908 Canon Printer Customer Support Phone Number for technical assistance.

Reset the Wi-fi Connection on Brother Printer in just 11 steps

Do you want to reset your Wi-Fi connection on your Brother printing machine?

But sometimes it happens to be a novice user you exactly don’t know how to reset it. This blog will definitely help you to reset the Wi-Fi connection on the printing machine. OR to avail instant help by experts you can directly call 24/7 available Brother Printer technical support number (1-800-862-1908).

To start the process you will require the password and network name for your remote system.

Mandatory Steps to Reset the Wi-Fi Connection on Brother Printer

1. First, you have to tap on the “menu” button on the control board.
2. By using the arrow keys, the user looks down to “Network” then tap “ok“.
3. Again by the help of arrow keys, the user looks down to ‘Network Reset‘ then carefully tap “ok“.
4. Always ensure that carefully Press “1” to state yes. At that condition tap” 1′ again to confirm a reboot.
5. Now the printer will not reboot.
6. Once user ended the printer work it will ask you to ‘Setup WIFI’.
7. Now you have to Press “ok” 3 times to message the ‘Setup Wizard’.
8. Carefully select your ‘WIFI Network’.
9. After choosing you WIFI Network carefully enter your ‘WIFI password’.
10. Press “1” and “ok” to apply settings.
11. A ‘connection ok’ report will then print naturally to tell that you are currently associated with WIFI.

After following the above steps you are unable to reset the Wi-Fi connection. Then Worry not calls toll-free Brother Printer Support Number 1-800-862-1908 for instant help.

If you too need any kind of assistance related to printers then; visit Printersupportsnumber and find the contact number of expert professionals.

Source Url - 

http://customer-support-number.over-blog.com/2017/09/reset-the-wi-fi-connection-on-brother-printer-in-just-11-steps.html

Panda Antivirus General Error Codes causes and its Solutions

Panda Antivirus helps us to defend our system and devices against malware, antivirus, spyware, key loggers, phishing attacks and much more. It also supports cloud-based protection. Panda Security software provide maximum protection from online and offline threats. It offers astonishing security at low price. But Apart from these outstanding features user also encounter some kind of issue in Panda Antivirus Program.

Below we mention the most common Panda Error codes and its solution 

Antivirus Error 0006:0010

Error Message- Activation error

Causes –

1. If user left mandatory fields blanks
2. Incorrect information entered during the registration Process of Panda AntiVirus like email id, password etc.

Solution -

1. Enter the Correct information like Password, Email id etc.
2. Always make sure that don’t left the Optional fields blanks.
3. Sometimes language is the main cause. Remove and then reset it. For this go to Control Panel> Regional and Language settings.

If you are still dealing with issues you can contact third party, Panda Antivirus Support Number.

Antivirus Error 0005:190009

Error Message- Activation error, Wrong proxy

Causes –

1. Incorrect Internet Proxy settings.

Solution –

If you want to fix this error message then always ensure that its Proxy settings is always correct, perform the following steps to correct proxy settings-

1. Open the antivirus program.
2. Then select Tools > Internet options > Internet Explorer settings.
3. Select Connections tab> LAN settings.
4. Always make sure that the internet proxy options are disabled.
5. Then Go to Update section of Antivirus and click on Settings.
6. Tap on Proxy settings and ensure if all checkboxes are unmarked.
7.  Again try to activate the antivirus and check it is work properly or not.

After following the above steps practically you unable to fix error. Then no Need to Worry call toll-free Panda Technical Support Phone 800-982-0436 for instant help.

If you too need assistance related to panda security program then; visit Protechknowledge and find contact number of expert professionals.